FOREST-homedecaramel-mural-from-TheWallery

Forest

By Home de Caramel

€159€501

Look at this quiet forest with birds and smiling trees!

Dimensions

Clear selection

The design could change depending of the model of mobile phone

WHAT'S INCLUDED

A wallpaper mural, an application tool, a how to install manual.

SKU: HC01M. Categories: , , , , , .
  • Superior quality

    Our products have a thickness 150g / m2 which it allows them to hide small wall imperfections.

  • EASY INSTALLATION

    The paper does not shrink or dilated. It can be easily and accurately cut. The joints between the papers are invisible. It can be removed without soaking.

  • HIGH DEFINITION

    Our wall murals and vinyls are printed on high definition images, so the printed image will not be pixelated or blurred.

  • FIREPROOF PRODUCT

    Our products are not flammable. Certified fire retardant on request.

  • EXCLUSIVE DESIGNS

    Our catalog contains designs that you can only find in our store.

  • ENVIRONMENTAL QUALITY

    It does not contain harmful substances and it’s also biodegradable.

  • DELIVERY

    5€ of the delivery.

  • SAFE CART

    Security payment.

Product Description

Look at this mural wallpaper design: a quiet forest with birds and smiling trees!

Additional Information

Weight 10 kg
Size

400 x 300 cm, 300 x 225 cm, 200 x 150 cm, 200 x 200 cm, 279 x 272 cm

Reviews

There are no reviews yet.

Be the first to review “Forest”

WHAT'S INCLUDED

A wallpaper mural design, an application tool and a how to install manual.

MATERIAL INFORMATION

Our wallpaper murals are without PVC. Plus, when produced with Latex Inks, prints are odorless. PVC-free Wall Paper is also easy to intsall. It comes pre-pasted and requires only water to install and remove.

Cleaning method: clean gently with a dry microfiber cloth.
Suggested use: to apply on all flat surfaces (walls, doors…).
Maximum width of a single sheet: 100 cm. If the size exceeds the maximum width of the material, the whole printed product will consist of multiple equal-sized sheets.

Our wall paper is prepasted-requiring only water to activate the glue, and is designed for easy application and clean removal.

1. PREPARE THE WALL

The wall suface should be clean, dry, structurally sound and free of mildew, grease. or other stains, and free of irregularities in order to achieve the best hanging performance and complete removal when redecorating.

TO APPLY ON DRYWALL

For best results, apply to a wall surface that has been painted with one coat of builder’s primer and one coat of latex paint. *

* NOTE: this is typical of new construction, a wall surface that has been painted with a single coat of primer or a coat of satin or gloss paint is acceptable.

The wall surface should be clean, smooth, and free of debris or contaminants.

TO APPLY OVER PAINT

Painted walls should be primed, smooth, and free from debris. Check the wall surface to determine the condition of the paint adhesion. If the paint is old, damaged, or flaking, priming is highly recommended.

TO APPLY TO A WALL PREVIOUSLY COVERED WITH WALL PAPER

Any old wall paper remaining should be removed as well as the old adhesive (remove by sanding or using adhesive remover). Primer should be applied to the wall surface that is clean, smooth, and free of the old adhesive.

TO APPLY OVER PANELING

Any grooves should be filled to achieve a smooth surface, then covered with an adhesion-promoting primer.

TO APPLY TO A WALL CURRENTLY COVERED WITH WALL PAPER

Not recommended.

2. APPLY THE WALLPAPER

Follow these step-by-step instructions.

1. Loosely roll the printed wall paper with the printed side facing ing.

2. Completely submerge the rolled wall paper in water (in a wall paper tray) for 10 to 15 seconds to activate the adhesive or use a spray water and wet a lot the paper.

3. Remove the roll by pulling the leading edfe out of the tray slowly, glue-side up.

4. “Book” the wall paper by laying it on the floor flue-side up, than folding the glue side against itself for approximately 1 minute (avoid creasing the paper when booking).

NOTE: this product expands slightly in water, for best results, soak and book each panel the same amount of time.

5. Unfold the top half of the wall paper, leaving the botton half of the wall paper booked, and position the glue-exposed portion of the top of the wall paper on the wall.

6. Once satisfied with the initial positioning, unfold the wall paper exposing the remaining glue surface.

7. Using a damp sponge, smooth downward and outward.

8. It is recommended to overlap seams 1 cm.

TIP: Do not over smooth-bubbles smaller that the size of a U.S. Quarter (about 24 mm in diameter) will dissipate as the wall covering sets.

You may also like…

RECENT PRODUCTS